View Single Post
  #82  
Old 3rd April 2013, 11:33 AM
MikeB MikeB is offline
Senior Member
 
Join Date: Apr 2007
Location: Nr Wellingborough
Posts: 512
Default

Thanks Eddy,

Mananage to get my rear brakes sorted, still need to shorten the handbrake cable but other than that the rear brakes are sorted.
I had to put a notch in the uprights to fit the rear flexis.

I spend a good amount of time on my pedal box,its the OBP kit car one.
I couldn't work out a good way of connecting the throttle cable, OBP weren't very helpful. In the end I completely changed it by raising the pedal and coverting it to a bottom pull arangement with the cable coming in through the lower chassis member. It has just enough pull to fully open the carbs, action is now smooth with no funny angles of the cable, very happy I got that sorted, I'll post some pictures when I get a chance.
__________________
Build Cost so far £xxx (Given up adding it up) - She Starts!! Build Thread Here:
http://www.haynes.co.uk/forums/showthread.php?t=5501
Reply With Quote