Quote:
Originally Posted by Stot
You need a tell tale or the instruments to light up with side light, most do. IVA Manual refers to them as Front and Rear Position Lamps in section 22.
Cheers
Stot
|
Yes it's a bit ambiguous, as they aren't position lamps and they refer to a position lamp switch. But anyway I have now reinstated the binnacle illumination. I had switched the binnacle to illuminate on ignition. I also properly sorted out all the wiring for the shift light install post IVA and made a better job of the wiring protection/neatness while I was in there.
Quote:
Originally Posted by SeriesLandy
I did this with my front indicators, mainly to cover the visibility issues.
I didn't have any problems with them being too far inboard.
Iva indicator extension by Series1Landy, on Flickr
|
I see, my only concern now is that they are only 10w not 20w, but if people are using tiny led stork front indicators I think they will be fine.