View Single Post
  #1  
Old 18th July 2012, 09:01 PM
trick-kit trick-kit is offline
Member
 
Join Date: Feb 2011
Location: Devon
Posts: 96
Default Clear out of the workshop

Having a bit of a sort out of the worshop today, as a couple of new projects are about to start, has unearthed a few Roadster parts that I thought it best to offer up to you guys. Other wise they'll sit under the bench for god knows how long.

All parts are new and of top quality, as anyone who used to purchased from me during my 3GE Components days will testify. Anyway here are the parts.

1. CP3/4 assembly package, this is the shock/roll bar towers for both sides, complete, as they are to my latest self jigging design which locates everything including the shock mounts £20 posted SOLD TO JOELOVE


2. RU7 Pair of Rear up right plates in 10mm mild steel £15 posted

3. RU8 Pair of Rear Upright Plates in 10mm mild steel £15 posted

4. Steering Rack Mount kit, consisting of CP19, CP20 & CP21 £10 posted

5. Small Brackets Set, consisting of CP1, CP2, CP9, CP22, CP23, CP24 & CP25 of the right quantites for a chassis. £15 posted

6. CP11 Pair of plates in 1.5mm rather than the 1mm the book recommends. £8 posted

7. CP10 Pair of chassis plates in 5mm (the correct length and with markings to show correct orientation) £10 posted (2 sets available)

8. CP15 Pair of Steering column plates £7 posted

9. CP14 Hand brake cable stop, has cut out for easy cable fitting £4 posted

10. CP18 Seat belt brackets, set of 4 £8 posted

11. CP16 plates, in 1.5mm instead of 1mm, £7.50 posted

12. CP17 Footwell plate, again in 1.5mm insted of 1mm £7.50 posted

13. Unlucky for some, a few bushes, consists of a pair of bushes and a stainless steel crush tube £4 each (6 available)

Some of the above may be helpful for someone, I can always be contacted via PM on here or at john@trick-kit.co.uk

TK
__________________
Innovation not Imitation!

Last edited by trick-kit : 20th July 2012 at 09:56 AM.
Reply With Quote