Thread: The castor angle & Rear wheel aligenment
View Single Post
  #2  
Old 11th August 2009, 03:46 PM
flyerncle flyerncle is offline
Senior Member
  
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default
Might be wrong Axle but castor angle is not adjustable and is fixed by locatation of suspension brackets.
Camber is done by the adjuster on the top of front and rear uprights.

Rear wheels could be done by making an eccentric washer that moves the lower arm in and out in the horizontal plane making it in effect shorter or longer and will move the front of the wheel in or out.

Hope this helps.
Last edited by flyerncle : 11th August 2009 at 03:49 PM.
Reply With Quote