Quote:
Originally Posted by mark
Might be worth checking tr1 for straightness by looking down the length as a slight bow may account for the slight discrepancy. Seeing your pics jogged my memory that a couple of pieces of mine seemed to be a little out even tho everything was cut pretty much bang on and this was down to some of my steel being slightly bowed 
Is it the same situation on both sides?
Those tacks are a touch too big so will have twisted things a bit but im sure you will sort it  just a tiny tack on opposite corners is enough at this stage, its supprising how strong it becomes once triangulated even with tiny tacks  |
Yep, its the same situation on both sides of being too high, but you are correct, there is a bow in it, but thats becasue i did that to make it fit as the nose was too high to tr1 and tr2 are being strssed alot as the are being bent upwards atu3 and u6 so they reach the extra height of ff4, but they are bent ever so slightly, whcih will be fixed by lowering ff4