Quote:
Originally Posted by mark
That sounds like could be the problem with front frame.
Its still best to have everything as close as you can though, some people have said they needed 3mm packing behind the upper front brackets to make them fit so dont worry too much
|
as Mark has said, yes some(if not most) people have needed to add 3mm spacers behind the front upper suspension brackets ( i did too ), i was just making sure that the actual bend in FF2 & 3 wasn,t where the suspension bracket back face would be welded to, hope that makes sense
, basically to be able to have a flat surface for the suspension bracket.
Nice one Geeman, i think you,ve sorted the front frame out & also this may help the placement of U1 & U2.
all the best
andy