View Single Post
  #6  
Old 7th October 2020, 10:18 AM
Tatey's Avatar
Tatey Tatey is offline
Senior Member
 
Join Date: May 2009
Location: Leicester
Posts: 820
Default

Bill, if you have grounded pin 56 that is connected to both switches this sounds like it is your issue.

Both switches should have ground on pin 15 and pin 31 not on 56. Pin 56 just needs to be connected between the two switches.

Grounding pin 56 is by passing two of the switches.
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9

My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020

Total Spent so far: Stopped counting
Reply With Quote