rollbar
Hi there
I made the bar myself i had to lend a friends CNC pipe bender to roll the 50mm hoop luckily i saved the programme on the bender so he can knock them out as he wishes. without sounding arrogant i spent the time and the radius on the corner is spot on no kinks or ripples. if anyone is interested i could probably get you in contact with him i am sure he could knock some more out fairly cheaply
The rest is just 38 tube the bosses are tapped to 7/16 unf as per harness bolts or eyes.
Oh yeah the tube is all the correct type wall thickness etc
|