I was doing this last night (started when I first stripped the car 3 years ago)
The haynes diagrams arn't too hard to work out.
There is a page with a list of each individual component that coresponds to a grid reference of the location on the wiring diagram.
Start with the fuses that you dont need, cut out the non live side first.
Then remove the wires from the empty relay holders (some have a common live/earth).
I also cut out the wiper motor socket and wiper stalk socket to remove some wires.(If your not having wipers)
I found it easy to cross reference with the actual sierra hand book (page 95/96) and the haynes manual.
By combining a couple of fuses and keeping the cigar lighter cable just as an extra I got it down to 12 fuses.
|