View Single Post
  #5  
Old 23rd January 2017, 02:29 PM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

If I remember correctly. I used a 12.5mm drill bit for the small cut outs.
Used a hole cutter for the radius of the steering rack arm slots.

If you look at the manufactures website for the trim you want to use, they should state the minimum radius for inside bends.
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk
Reply With Quote