View Single Post
  #39  
Old 27th February 2010, 12:18 AM
AshG's Avatar
AshG AshG is offline
Super Moderator
 
Join Date: Jul 2008
Location: Rochester
Posts: 1,882
Default

yes i have clamp attachments for my cross slide, so reamer in the chuck line it up an off we go. it put a fair bit of stress on the lathe but keeping the rpm down and plenty of oil helped. after doing it i decided that a better method would have been to turn the end of the reamer down to 13mm so it would fit in the chuck on the pillar drill.
Reply With Quote