View Single Post
  #14  
Old 29th June 2014, 12:38 AM
Ben_Copeland's Avatar
Ben_Copeland Ben_Copeland is offline
Senior Member
 
Join Date: Feb 2009
Posts: 290
Default

Hi Sylvain.

I wasn't belittling your project I'm sure it'll look awesome when you have finished and will be the highest of standard.

The only reason I suggested the chassis could be out is the side panels come from a mould and they have fitted so well on mine. I would of made the same suggestion whether it was equinox or gilham or anyone else's bodywork.

You mention 10mm gap that you have to raise the nosecone? Suggesting the panel is 10mm out at the front! This is a little more than error in the thickness of the fibreglass. Hence the suggestion that there could be an issue with the chassis. I don't know who made the chassis as I haven't read you build reports. So no need to get defensive.

I haven't mentioned equinox in quite some time and this is the first in a while. Except for Robos the other day who had posted about how good the bodywork is.

As I suggested you have a chat with Dave about this as he would be my first port of call before posting pictures and asking for help.

Good luck with you car, sure it will all turn out fine in the end.
Reply With Quote