Thread: Wishbone bushes
View Single Post
  #2  
Old 20th December 2009, 05:41 PM
Talonmotorsport's Avatar
Talonmotorsport Talonmotorsport is offline
Senior Member
 
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
Default

Who made the bush tubes and who made the bushes, have the bush tubes been bored out or just left as seamed tube? Are you trying to fit nylon or poly bushes? If every thing has been made 'as per the book' then every thing should fit with a little help, if how ever a few things have been changed then 0.5mm here,0.5mm there plus a welded seam means there not going to fit. Suspension parts are engineered,measured to fit and work not just assembled with crossed fingers.
__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334

Last edited by Talonmotorsport : 20th December 2009 at 07:18 PM.
Reply With Quote