Another problem if someone could take a look please.
The CBS fuse/relay module won't let me supply the hazard light relay with 12v when ign is off with my ignition switch config.
Will the (crude) diagram below work? I have it wired nearly this way at the moment except the hazard relay is on the same power source as the regular indicator relay and there is no diode.
I can make a direct to battery 12v supply to the relay without issue but what I don't want is that then somehow powering up the rest of the electrics via the indicator circuit if I were to say operate the hazard switch with the indicator switch engaged to either side hence the diode.
