Hi Jonno,
I have in as much put some rivnuts on the chassis, currently it butts up directly I had to sand a little bit off the returns in the nose next to the lower from suspension mounts as it was a very tight fit.
I'm not 100% but I think the scuttle may sit a bit further back than the other kits as I had to cut a hole for the steering column and a bit either side for the steering column brackets (other kits don't have that part of the front bulkhead built in). So I did wonder if it was sat too far forward. But it does all line up nicely with the bonnet in place, I need to rivnut the scuttle in place next, I think it should all be ok.
let me know how you get on,
|