Quote:
Originally Posted by HandyAndy
What you can do is not "panel in" the underside where the tranny tunnel is, that makes the prop easy to get at from below,
or
fully panel in the whole bottom/underside & make the top of the tranny tunnel interior panel removeable ( this is how mine is ) as I thought getting into the prop would be easier from above rather than from below.
Also worth noting.....The IVA tester "may" want to see inside the tranny tunnel come test time.
cheers
andy
|
Cheers Andy.
Maybe I will do as you said. Panel the underneath as one piece with rivets, and all of the inside/outside bodywork and above the tunnel I will rivnut.