Thread: Rev counter
View Single Post
  #3  
Old 17th October 2011, 08:08 PM
mark mark is offline
Senior Member
 
Join Date: Mar 2009
Location: Billingham (north east)
Posts: 770
Default

Quote:
Originally Posted by brainbug007 View Post
Thanks adrian, it did help a bit. I must say making the circut with diodes etc is a bit daunting as I've never made anything electrical before! If I have to go down that route, can I get stuff like that from maplins or ebay? I have no idea what to look for as the codes quoted don't mean anything to me I did come across this http://www.minifinity.com/forum/view...p?f=5&p=852579 which seems to indicate that pin 11 on the edis might work instead of pin 2 which I've already tried.
You will probably only get it to half read with the edis outputs, you can buy the diode thing already made from trigger wheels and run it from the coilpack which will definately work
Reply With Quote