Looks like an ATL brake tester was used as the kerb weight and unladen axle weights are on the sheet,as I posted the weights of 450/450 are good figures and leave plenty of room for extra weight.
Its working against you if the brake readings are low,it can be worked out from weights and brake force easily.
You have the MAC cert so its all handy for others to know.
If you used 550/550 -1100 kg you would need a total service brake force of approx 640 kg to give 58% rate to pass.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!
If at first you dont succeed,avoid skydiving...
No parachute require to freefall,only if you want to do it twice.
Last edited by flyerncle : 30th June 2014 at 02:08 PM.
|