Quote:
Originally Posted by Twin
Wait for HandyAndy!!!  |
As David has said, CP10 must align flush with the rear face of SB4,s as the CP10.s are the main chassis plates for the diff hangers,
As you have found , due to the angle of SB4,s & the length of CP10,s "it doesn,t fit"............
You are not the first builder to have come across this & others in the past, including me have removed a little off the CP10 to get it to fit "snugly", but ensuring it fits on the rearward face of SB4 to aid the flush fitting of the diff hangers.
Don,t forget the holes in CP10 are spaced differently & so must be placed the correct way up.
hope this helps,
cheers
andy
