Thread
:
Suspension brackets on front frame!!
View Single Post
#
4
7th November 2011, 07:12 PM
Talonmotorsport
Senior Member
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
How far out is the studing compared to the wooden jig on the front frame, have you made FF4 630mm? If the holes are out by 2-3mm remake the jig so they match front to back and just move U1 and U2 out to match. You only need the box section as a straight edge that you can hold about 250-300mm above the table to find where the brackets are pointing. When you can get the box section paralle to the edge of your build table you have the brackets in the right place.
__________________
Website
http://www.talonmotorfabrication.co.uk/
Direct email
phil@talonmotorfabrication.co.uk
talonmotorfabrication@gmail.com
Mobile
office hours 07514098334
Talonmotorsport
View Public Profile
Send a private message to Talonmotorsport
Visit Talonmotorsport's homepage!
Find all posts by Talonmotorsport