View Single Post
Old 19th February 2018, 12:32 AM
dean211277's Avatar
dean211277 dean211277 is offline
Join Date: Dec 2008
Location: Rutland
Posts: 58

Originally Posted by Numplumb View Post
Hi I got mine from Rally Designs.
Just stripped mine down to clean everything up and when I removed the shock from the wishbone at the rear, it seems wobbly on the bolt at the top mine has 12mm bolts but the bushes in the shocks is quite a loose fit, same in the wishbone bushes, never really noticed before, they haven't worn as the car hasn't been any where but they don't seem right to me, anyone know if they should be like that the holes in the suspension brackets as supplied are all 12mm
But the poly bushes are definitely a bit bigger.
From what I gather the bushes are generally made as per the book, which is a 12.5mm hole ( some places do make them with 12mm holes) this could explain the 12mm bolt Being a bit loose.
You could ream them out to 12.7mm which would then fit a 1/2 inch bolt.
Reply With Quote