View Single Post
  #5  
Old 2nd April 2014, 04:00 PM
Ben_Copeland's Avatar
Ben_Copeland Ben_Copeland is offline
Senior Member
 
Join Date: Feb 2009
Posts: 290
Default

In reality it doesn't really matter too much if its not tight to the chassis.

Mines riveted along the bottom flange to the chassis and riveted behind the rear arches.

Once the rear arches are fitted I don't think you'll notice if the ends are pulled in slightly as the panel will be pulled about to match the arch shape.

Last edited by Ben_Copeland : 2nd April 2014 at 04:27 PM.
Reply With Quote