View Single Post
  #4  
Old 7th January 2009, 08:50 PM
nexus446 nexus446 is offline
Junior Member
 
Join Date: Dec 2008
Location: Rotherham
Posts: 11
Default

I personally would use the bikes entire loom and adapt it where needed, i.e extend and modify the length accordingly for the various circuits, The lights staying on with engine running as per modern bikes can be overcome easily, usually there is a separate live feed or a switched earth which is fed to the dip beam relay, different bikes use different systems but all similar, best to study the current flow diagram for the particular loom your using and disconnect the feed accordingly, a little electrical knowledge is helpfull but i`m sure a google search for the relevant info on that particular loom would throw a few hits if unsure.

Chris.
Reply With Quote