View Single Post
  #7  
Old 8th July 2011, 05:33 PM
trick-kit trick-kit is offline
Member
 
Join Date: Feb 2011
Location: Devon
Posts: 96
Default

Quote:
Originally Posted by Aussie_Haynes_MX5 View Post
Airhead, looks good. Especially like the way you've done the rear diff mountings. Look forward to being able to download the plans. I just bought a running NC MX5 for $1,000 (Australian), which if you do the conversion would be about 350 or so pounds. Build board has had to be started again so this design would be great help!
Indeed, a lot of hard work has gone into the design to make it right, for instance the diff frame was designed to be both lighter and neater than just welding a huge flat plate on the Haynes frame. As they say the devil is in the detail, and with this design it certainly shows. It won't be long before you can download the drawings and get going

Oh, and wait until you see the bodywork to go with this, just as much thought has gone into that as well.

TK
__________________
Innovation not Imitation!
Reply With Quote