View Single Post
  #4  
Old 7th November 2011, 08:12 PM
Talonmotorsport's Avatar
Talonmotorsport Talonmotorsport is offline
Senior Member
 
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
Default

How far out is the studing compared to the wooden jig on the front frame, have you made FF4 630mm? If the holes are out by 2-3mm remake the jig so they match front to back and just move U1 and U2 out to match. You only need the box section as a straight edge that you can hold about 250-300mm above the table to find where the brackets are pointing. When you can get the box section paralle to the edge of your build table you have the brackets in the right place.
__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334
Reply With Quote