Quote:
Originally Posted by PorkChop
You could always put the bottom rail back, so to speak, by adding a bolt in brace bar. I reckon that there's enough space to do so using a thick enough piece of (shaped?) flat bar.
|
Yeah, I think now I might be able to get a thickish bit of angle in there now but I'll hold off until I'm totally happy where the motor is.
As I have a problem with a slight bulge..... well a 90mm-ish bulge, first speed bump should sort it but need to do it now rather than let the council do it...
But have been googling dry sump kits and this looks yummy....
Costs a fortune so I've found a nice scavenge pump on the bay and just need a couple of 10mm plates to fettle so I'm confident I can do it quite cheaply.
Just hope I can make the pump fit in the 50mm gap down the side here...
BTW guys, do any of you know a good easy way to clean the engine without stripping it.?