View Single Post
Old 19th December 2009, 05:33 AM
ozzy1's Avatar
ozzy1 ozzy1 is offline
Senior Member
Join Date: Jul 2009
Location: perth,australia
Posts: 760

Go into the announcements section and there is a section on book ammendments that has the info on the rear wishbones.
If you are looking at the drawing for the jig on page 65 fig 5.15 the 465 dimension is incorrect and is 475 as listed in the text below it is the correct dimension.(475-50=425 which is the 391+33.7=424.7)
hope this helps

Last edited by ozzy1 : 19th December 2009 at 05:37 AM.
Reply With Quote