View Single Post
  #610  
Old 11th July 2015, 07:40 PM
Stot's Avatar
Stot Stot is offline
Senior Member
 
Join Date: Nov 2012
Location: Wolverhampton
Posts: 750
Default

Right, finally on top of my engine cooling. I got myself a 55mm 3 row aluminium radiator.



Its polo based however I thought I would mount it vertically for space reasons. 55mm rad and 75mm inter-cooler is pretty tight already in the nose and leaving space for hoses to pass the chassis was impossible.



I actually find this a much better solution all round, even if I didn't have an inter-cooler.

Coupled this up to a 10" Revotec high power fan. I haven't even ducted the nose yet and can hammer it along the motorway without going above 93* in the hot weather today. Previously I would need to slow down to 55mph to allow the engine to get down to 100*

In traffic the fan kicks in at 97* and only takes 60 seconds to get the engine back down to 92*. Well happy.

Now If I can relocate my air filter to somewhere less warm...

Cheers
Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP
Build Started Jan 2013 : OTR Aug 2014 : Build Pictures
Reply With Quote