[HandyAndy]

I,m a little confused here.... in my book , CP25 is correctly identified to fit on the rear tub upright ( RP3) on both sides of the chassis.

CP24 actually goes at the front of the chassis in the joint where BR1 & BR8 .....BR2 & BR9 meet, its a support plate for the lower rear front wishbone bracket .

I Thought I,d add this to help clarify.... There are 2 CP25 plates for the rear of the chassis as in the diagram you mention.

There are also 2 CP24 plates that are positioned at the front of the chassis as I have described,
Tho , you are correct, there is no text in the book to where CP24 plates are located.

hope this helps.

cheers
andy