If the hole in the sump metal is pushed in over it may be ok, if any of it is pushed out over it may have dropped something internal and burst out of the bottom of the sump.
Hopefully some knob has just put a hole in it !
The bit you have removed is the rocker cover ,there are 8/10 bolts that hold down the head and they are evenly spaced under all the oil and crap,once you get the head off there are small dowell pins in the block don't loose them.
Put the pistons level in the block about half way down and put enough parrafin or diesel in the bores to cover the piston and leave it for a while and see how long it takes to run down,if it goes quickly its knackered and the bores/rings/pistons are worn.
Last edited by flyerncle : 7th October 2009 at 05:27 PM.
|