Thanks for the helpful post Bonzo!
Just so I can create a cut and clear list for future reference. To go from an early 1.8 silvertop zetec (pre 95) to a Type 9 gearbox I will need a 1.8 clutch from a MK1 mondeo, a spigot bearing from a Sierra, a 1.8 mk1 mondeo flywheel and a clutch release bearing (I'm sure I've read somewhere that these are common Ford Capri bearings?).
So that means that the following should get my bare engine mounted to my type 9 gearbox with no issues:
1.8 Clutch - MK1 Mondeo
Spigot Bearing - Ford Sierra
1.8 Flywheel - MK1 Mondeo (My engine didnt come with a flywheel)
Clutch Release Bearing (CCT133) - Possibly from a Capri
ARP Flywheel Bolts
CVH Starter Motor (Currently Have)
CVH Alternator (Currently Have)
Sierra Sandwhich Plate (Currently Have)
|