Quote:
Originally Posted by mdasseville
Thanks
Ashg /Andy,
Just one more question,...
What fly wheel and cluch are you using?
As i have the 2l zetec fly wheel ,pressure plate, and plate!
and also the 2l dohc 8v fly wheel ,pressure plate, and plate!
will any of this be any good to use?
Thanks
Mike
|
Not sure about the dohc flywheel and clutch but i used the 1.8cvh with the addition of a new spigot bearing but that was onto the type 9 gearbox, cvh has a lighter flywheel but you loose the timing wheel which you can attach to the front pulley wheel.
If in doubt try the locost forum, i got some good advice from there.
Andy