it really depends on what engine and what bonnet, if you look through my build photos you can see mine is offset (can measure if needed)
Mine is a 2003 svt engine with the gubbins on the rocker cover but iirc it was the corner of the plenum that was touching the inside edge of the bonnet / scoop return (large scoop bonnet Gillham , now vmax)
if you have the bodywork then you can trial fit, jig the engine and make the mounts to suit , again simple mounts as per my pics in build thread, oh and this gives me good sump clearance..... so far !!
this allowed me to use the gearbox mount as per Saturn plans and a spare engine mount rubber screwed into the bottom of the gearbox
hth gary
__________________
remember we are not mad just creatively insane
|