View Single Post
  #3  
Old 5th March 2010, 10:31 AM
spud69's Avatar
spud69 spud69 is offline
Senior Member
 
Join Date: Jul 2008
Location: Hartlepool
Posts: 1,678
Default

For the bush tubes Enoch you need to dog them right up, the poly bushes will then compress slightly and the brackets will clamp the s/s tubes so that the poly bushes rotate around the s/s tubes. They can squeek but if you use copper slip grease on the s/s tubes this will stop this. Some people recommend silicone grease but at nearly £20 a tube its expensive and i have found copper slip to be better.

There should be no play on the joint and be relatively stiff to move by hand, they will soon wear in.

Regards....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com

Regards..........AndyH
Reply With Quote