Thread: Mx5 mk3 build
View Single Post
  #2  
Old 20th April 2014, 11:21 AM
TalonMotorFabrication TalonMotorFabrication is offline
Senior Member
 
Join Date: Jun 2011
Location: Southminster Essex
Posts: 260
Default

You might want to google a few images of the MK3 diff as I think it can be mounted from the top, if you remove the stubby cast ali arms it is effectively hung by 4 bolts. Although you will still need to make a SOLID mount for the nose of the diff that bolts to SB4. If you still have your chassis set up for the Sierra diff a section of 3-5mm plate welded to the under side of RS11+12 would be the way I would go with it.



__________________
Unofficially rated No.1 supplier of fabricated Haynes Roadster parts by the workshop rat population.

Direct email talonmotorfabrication@gmail.com

Last edited by TalonMotorFabrication : 20th April 2014 at 11:28 AM.
Reply With Quote