Quote:
Originally Posted by Cropper
Hi All
Just managed to place the engine & gearbox in the chassis, to see what it looks like. I have got a good position for height 40mm below chassis rail & how far back to sit it, but was wondering what the consensus was over positioning around the centre line, there seems to be a few different ideas out there.
I have a Saturn based chassis with a 1.8 MX5 motor. I want to avoid power bulges on the bonnet!
Thanks
Neil
|
Hi Neil,
If you are using the 1.8 engine this will fit with it place directly down the centreline. i'm using a 1.6 engine and have it slightly towards the nearside which means there is a little bit more room for the clutch slave cylinder to work.
David
__________________
Click to see my build photos on Flikr
http://www.flickr.com/photos/67112582@N03/
Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack.
Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though).
Car iva'd and passed 15/08/2014. Finished weight 572kg.
|