View Single Post
  #6  
Old 8th August 2015, 09:11 AM
Stot's Avatar
Stot Stot is offline
Senior Member
 
Join Date: Nov 2012
Location: Wolverhampton
Posts: 750
Default

The width is not important, its a single reference point. I made this to work things out, a rough copy of what they used in the test. You put it on the seat with the lower left corner touching the base and back of the seat, then put the stick bit at 90 degrees straight up. The string should be level with the ground when measuring the anchor points. They had a bubble that hung on the string.



Mine is marked 700mm for the head rest height, you would need to have a bolt at 450mm for the anchor points.

Here I am measuring my headrest height, the stick goes parallel with the seat back for this one.



Cheers
Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP
Build Started Jan 2013 : OTR Aug 2014 : Build Pictures
Reply With Quote