Quote:
Originally Posted by AdrianH
Perhaps I used force and ignorance, or a slightly taller flabby nose cone?
But I could get the front edge under the bottom rail, it is sort of shaped _.-----._ at the front, so fitted that tang under the edge then puled the cone unto the top rails and seems to work well.
Must remember one day to screw that bottom edge in place!
Adrian
|
This is how mine was done, it is an ultra tight fit to have the lower lip tucked under the bottom chassis rail, but it does go
i found if i got the nose to a nice room temp it made it a little easier
cheers
andy