Quote:
Originally Posted by fabbyglass
Well I would say check the height of the chassis then as the mould can't shrink 12mm for one customer and grow back for the next......
|
Oddly enough this was one of my first worries
"Oh poop, I hope my chassis isn't wonky" after tacking I'd never rechecked the dimensions
But its bang on (+/- 1mm). I pulled the bottom over the lower rail and eased the top edge on, but its just too tight, so much so that the corner developed a crack in the gelcoat, when stretched.
I think I'll do what Ash did and pop some bolts in. I was going to try to rivnut it but I'll try something different.