I've also had a pinking at a couple of little bits - the brake light switch and the cover for the front of the footwells.
This kind of shows my solution - I've made up a bracket out of 16swg onto which a microswitch is bolted - or at the moment held in with a couple of nails as I have no bolts of the right size! The bracket bolts into the pedal box, so it's adjustable with the pedal. I've welded a plate onto a nut which threads onto the pedal push rod (again allowing some adjustment) and is held in place with a locknut. Seems to work well enough for now but I've got some misgivings about the plate on the pushrod - may try to sandwich it between locknuts or even put some loctite on it to be sure.
Finally I've cut the top panels into shape, will rivet and bond them into place next weekend. The aluminium front of the scuttle will bolt down onto the top of these, probable via rivnuts.
And finally my new rollbar compared to the existing one... whoops...
