[garyt]

Hi I used std rear cables that came to a bracket in the normal position as per book but big but depending on where your lever is going depends how you set the bracket side to side to get as even a pull as you can
My lever is close to the drivers side of the tunnel so my bracket is towards the drivers side
Now the offside cable goes to the near side of the bracket and vice Verda I made a couple of p clips to secure to the edge of the diff mounting plates also bent the bracket on the calliper back to get cable clearance
Then shortened the front cable to suit distance from balance bar to handbrake
I think there are some pictures in my build thread "progress so far" if suck I will take some more pics if you need
Gary