Quote:
Originally Posted by vincenzo
Can't see how the wishbone will work as the crush tube is set slightly back from the bush as shown in the attached picture. It is like this on both sides. My understanding is that the suspension bracket needs to "pinch" the crush tube but my bracket is going to pinch the bushes first!!!??? Advice needed!
http://s783.photobucket.com/albums/y...t=PA040160.jpg
Vince |
You're right Vince, you're crush tubes need to protrude from the bushes slightly. The bushes do give a little bit but should be atleast flush with the crush tubes. Maybe the thickness of the powder coating on the suspension brackets has pushed the bushes out. Grind them down and seal the ends maybe..
AndyH