Thread: rear upright assembly.
View Single Post
  #2  
Old 27th February 2010, 09:22 PM
alga's Avatar
alga alga is offline
Senior Member
  
Join Date: Feb 2009
Location: Vilnius, Lithuania
Posts: 1,249
Default
On that diagram RU7 is drawn as 3 mm plate, whereas it should be 10 mm, it's on the list of amendments. It must be flush with the edge of the tube.
__________________
Albert
Haynes Roadster FAQ | Haynes Builder Locations
Gallery, build thread in Lithuanian / via Google Translate.
Reply With Quote