View Single Post
Old 2nd September 2010, 04:51 PM
davedew's Avatar
davedew davedew is offline
Senior Member
Join Date: Jul 2010
Location: Taunton
Posts: 342

Can you disconnect the pipe from the master cylinder to the slave cylinder at the MC end? If so you will be able to see if any fluid is leaving the MC.

If fluid is leaving the MC reconnect the pipe and disconnect at SC. Try again and see if fluid is getting through the pipe.

Should be able to narrow it down to which part is at fault then.



OTR 01/05/14 - 1.6 CVH, Type 9, Bike Carbs, Megajolt
Reply With Quote