Quote:
Originally Posted by ashbudd7
While on the subject, then, what sort of protective gear do you need if you were to use the chassis black (number p140 from frost.co.uk,) either thinned down and sprayed or brushed on?
Thanks, Ash
|
rule of thumb is if it has isocynate in you need to use an air fed mask as it is realy hard to filter out and its realy nasty stuff.
pritty much all 2k paints and thinners have it in (2k= 2 pack polyurathane not epoxys)
i use a proper 3m mask for spraying like this
https://encrypted-tbn3.google.com/im...xbE_4wqBn1msKg
but you should check the COSHH sheet for your product to be on the safe side
if your brushing there is no airbourne paint so its just the vapour you need to worry about.