The EDS kit is the same as we sell only in separates:
1 pair Maxi Ball Joints
1 pair Transit Drag Links - with half nuts
1 pair RS2000 Track Road Ends
Only call them RS2000 TRE since Rally Designs sell them as this and we all get them from the same place just a bit cheaper for bulk buying. Have used these on cars and been selling them for over a year now and they have always been fine and as recommended in the manual. There has been a few threads created to read on the Locost site about the track rod ends available.
For the transit drag link don't forget to put in a secondary locking device through the upright and mushroom adaptor, ie drilled and tapped 6mm hole with a bolt through. The hole in the bottom upright needs to be reamed out to accept the maxi ball joint to show enough thread for the locking nut, careful not to go too far. The track rod end will pull up tight into the taper with the rubber housing moving down the taper to suit.
All the Best....AndyH
|