Started to plumb in the cooling system.
Ordered the parts from ASH on ebay, good service.
1x 32mm 180 bend
1x 1m long pipe
1x 32mm joiner *may need one with a T-piece
1x 500mm length of 32mm hose, to be cut up and used as joiners.
1x 1m 16mm length of pipe
A polo radiator for less than £30!
and a push pull 12" fan from ebay, seems ok quality and powers up nicely
IMAG0362 by
mjb22001, on Flickr
I'm reusing the sierra hose for the bottom rad pipe its not perfect but looks pretty good (not sure if this was the top or bottom hose on the sierra installation)
The pipe exiting the water pump was cut a re welded to make it shorter, I also welded it 180 deg so the small pipe exits downwards away from the manifold.