Thread: Rear toe?
View Single Post
  #4  
Old 13th August 2014, 03:27 PM
TSM Locost's Avatar
TSM Locost TSM Locost is offline
Senior Member
 
Join Date: Mar 2007
Location: Wisbech
Posts: 423
Default General setup.

Westfield setup from Westfield world.

Front Ride Height Approx 160mm Determined by wheel/tyre combination
Front Camber 1.5 - 2.0 Degrees Negative (Radials) 0.5 - 1.0 Degrees Negative (Crossply Slicks)
Front Toe in/out 0.5 - 1.0 mm Toe in
Front Damping 2 - 3 click from fully soft
Rear Ride Height Approx 170mm - 175mm approx 10mm - 15mm higher than front
Rear Camber (seiw only) 1.0 Degrees Negative 0.5 - 1.0 Degrees Negative (Crossply Slicks)
Rear Toe in/out 0.5 - 1.0 mm Toe in
Rear Damping 2 - 3 clicks from fully soft
__________________
Be Lucky, Mike.
Reply With Quote