Hi to all,
I have been looking at UncleFista's homepage.
www.bradford7.co.uk
I read with great interest the section titled SVA Result. The two items that cause me the most concern are the failure of the shocks and the steering arms on the front hubs. Both for a radius breach ( Less than 2.5mm )
Surely all coilovers are of a similar design
I have looked at the Sierra front hub. The steering arm on this also has no radius of 2.5mm on the exposed edges.
Do we need to modify them with a little linishing or was the SVA Inspector having a bad day.
UncleFista's SVA Fail serves to show us all the standard required for an SVA Pass.: