Quote:
Originally Posted by RAYLEE29
I hate rust too but my solution was a bit more simple
I had a coffee jar with an oily rag init every time i finshed a section out came the rag and wiped over the rellavent chassis parts with oil
to stop the condensation from my aluminium roof dripping on my chassis i put a membrane stretched across the roof joists above my build area
this worked well and kept my chassis rust free for nearly a year before i painted it obviously you need to degrease before painting
Ray  |
I've been doing someting similar. After I cut a piece to size I dip the end in a jar of diesel engine oil and give it a wipe with a rag. Then dip the other end and wipe again just to make sure both ends are "sealed".